The following is a list of videotapes available to members of
the New York Lumbermen's Insurance Trust Fund. The video tapes
are available on a loan basis for a period of 15 days. If you
would like to use a training video, send an E-mail to
mconley@wjcox.com.
Accident Investigation (12 minutes)
This video provides the steps necessary to investigate
all accidents. A five point plan is developed so
information can be collected and assessed, so the
accident can never happen again.
53
Anti-Lock Braking System (15 minutes)
This video shows tractor trailers trying to stop in
slippery road conditions with and without anti-lock
brakes. Answers common questions such as, How do
anti-lock brakes work? And, How do I brake if the
anti-lock brakes aren't working? All trucks built after
March 1999 will have anti-lock brakes.
16
An X Factor (21 minutes)
Explores reasons for the occurrence of accidents in the
woods and mill yards and looks for the factor which
started the chain reaction.
65
Arc Cutting & Goughing (14 minutes)
Explores workshop
safety, housekeeping, PPE, condition and handling of
equipment, shielded metal-arc cutting, air carbon-arn
cutting & goughing and plasma-arc cutting.
10
Back Support Video (4 minutes)
Specifically designed for the ProFlex back supports.
2
Be Careful Today (19 minutes)
Features interviews with three people who have suffered
serious logging or sawmill injuries. Each victim has a
statement on the need for constant attention to safety
in the work environment.
32
Behind The Mast - Forklift Safety Training Programs
This is a set of 4 Videos by the DuPont Company,
dedicated to forklift safety.
Video 1: Loads & Their Effects (10 minutes)
Video 2: Maintaining Control (12 minutes) Video 3: The Professional Operation (13 minutes)
Video 4: Lift Truck Operations (30 minutes)
37
Bloodborne Pathogens – Emergency (23 minutes)
This
video is dedicated to those individuals who will be
responsible for the initial treatment of injured
employees. Fulfills 29 CFR Part 1910.1030, Emergency
Employee Training.
56
Bloodborne Pathogens in the Work Place (13 minutes)
This video explains what a bloodborne pathogen is and
also Hepatitis B and HIV.
71
Cardiopulmonary Resuscitation (15 minutes)
This video covers the basic of CPR, including one and
two person CPR. The steps to take in the event of an
emergency. NOTE: This video is for general refresher
training and is not NOT a substitute for hands-on
professional training.
9
Chainsaw Operator Workshop (2-1/2 hours)
The video explains the profession and the hazards, basic
felling techniques, and program cost estimates.
26
Confined Space Entry (29 minutes)
The final regulation, 29 CFR 1910.146, has been passed. This video
provides the information necessary to comply. Areas
included are: Entry, supervisors, attendants, creating
and handling permits, types of hazards, safety
equipment, and dealing with emergencies and much more!
66
Confined Space Safety (14 minutes)
Covers the basic aspect of confined spaces. What a
confined space is, the risks and hazards of confined
spaces, work permit program, why accidents occur,
potential hazards and control measures.
57
Dealing with Manual Handling (10 minutes)
Explanation of what manual handling is, what the
problems are and how injuries are caused.
6
Do It Right (20 minutes)
Covers basic safe handling of the modern chainsaw.
Stresses why chainsaws should not be drop started.
13
Don’t Push Your Luck (17 minutes)
This video is about eye protection. It contains some
graphic scenes of eye surgery. One person tells the
story of his industrial accident which caused loss of
sight in both eyes. Setting is classic machine shop
scenario.
52
Electrical Safety in the Workplace (28 minutes)
This
video demonstrates how electrical accidents can cause
damage to equipment and people, and can also cause
fires, explosion and death.
20
Environmental and Road Conditions (17 minutes)
Actual demonstration of drivers’ reactions to various
road conditions and hazards. Includes snow, sleet, fog,
rain, steep grades, proper braking, and evasive action.
50
Equipment and Machine Guarding (12 minutes)
This video discusses why guards are used and the risk
associated with mechanical hazards, such as:
entanglement, stabbing & puncture, crushing, and cutting
& tearing.
11
Eye Safety (5 minutes)
Covers basic eye safety on the job and off the job.
67
Falls in the Workplace (12 minutes)
Explores all the different types of fall hazards. Other
issues covered are good housekeeping, safe work
practices, prior planning techniques and control
measures
70
Fire Awareness (17 minutes)
This video covers the nature of fires, the causes of
fires, fire misbehavior, and fire safety management.
Also, fire prevention, fire inspections, training, and
equipment use and training. Some information on fire
suppression, portable fire extinguishers, employee alarm
system, and sprinklers.
27
Fire Prevention and Safety (17 minutes)
Reviews fire prevention steps and fire emergency
procedures. Also, common causes of workplace fires, good
housekeeping and other measures. Fire extinguisher and
the use and maintenance, equipment shutdown, fire
triangle, evacuation and first aid.
39
Good Housekeeping (10 minutes)
Good housekeeping in the ongoing maintenance of all
workplaces and access ways. It's more than just having a
pleasant environment to work in. A clean, neat, and
orderly workplace is a key factor in accident, injury
and fire prevention.
18
Handle with Care (15 minutes)
Features the many aspects to consider for safe sawmill
operations. Very good film for sawmill employees.
1
Hazard (18 minutes)
Loggers are shown face to face with some of the most
common and deadly problems confronting modern production
cutters. Realistic solutions and suggestions for each
hazard are demonstrated making the program particularly
appealing.
41
Hazard Communication for the Wood Industry (18
minutes)
This video demonstrates how to develop a written
program, provide training, and document results. Also, MSDS sheets and chemical labels.
12
Hearing (5 minutes)
This video will provide you with the basic problems
employees face at the workplace.
62
Inspection, Care and Storage of Slings (16
minutes)
This video explores pre-use checks, care of equipment,
planned periodic inspections, recordkeeping and correct
storage of equipment.
33
Introducing Employee Services (14 minutes)
Specialists in work-based health and substance abuse
programs.
25
"John Deere" Safety Programs (55 minutes)
This video demonstrates a positive attitude towards
safety, that accidents last forever, and split seconds
saves lives.
51
Knuckleboom Loader Safety Training For Loggers (22
minutes)
This video is designed to provide a
professional knuckleboom loader operator with the basic
knowledge needed to avoid accidental injuries on the
job.
7
Lockout & Tagout Procedures (14 minutes)
The video will provide you with the necessary steps to
eliminate the possibility of being injured accidentally
by the release of energy.
60
Lockout for Life! (20 minutes)
Why do lockout
23
Logger Training for Safety and Profit (45
minutes)
This video demonstrates hands on training for the
following: Chainsaw as a tool, notching and felling
techniques, and bucking and delimbing.
31
Mechanical Harvesting Safety (20 minutes)
This video presents a comprehensive overview of the
various hazards associated with mechanical harvesting
equipment.
30
Meeting The Challenge: Logging and Resource
Management (9 minutes)
This is a graphic portrayal of the technological change
in the logging industry and innovation present in modern
day logging. It takes the audience from oxen to
technically advanced, environmentally sound techniques
in less than 10 minutes.
24
Minimize Back Strain on the Job (24 minutes)
Explains and shows how the back works when lifting, and
demonstrates proper lifting techniques.
68
Noise & Hearing Conservation (13 minutes)
This video shows the components of the ear and how they
work. It details three types of noise, the hearing
conservation program, including testing, and sound
check, acceptable noise levels, and the use of PPE.
64
Oxy-Acetylene Cutting (26 minutes)
Covers all aspects of oxy-acetylene cutting, including PPE, workshop
safety, emergency equipment, equipment safety, hauling
equipment, flame settings, welding rods and shutdown
procedures. Also covered are “soap” test, backfires and
flashbacks.
63
Oxy-Acetylene Welding (26 minutes)
Covers all aspects of oxy-acetylene welding, including PPE, workshop
safety, emergency equipment, equipment safety, hauling
equipment, flames settings, welding rods and shutdown
procedures.
44
Personal Protective Equipment (17 minutes)
This video explains proper personal protective equipment
usage.
55
Pneumatic Fastening Tools (12 minutes)
This video
gives an in-depth review of nailers & staplers.
8
Put ‘Er There (15 minutes)
This video demonstrates the three most common ways to
safely fell a tree including the conventional, humboldt, and open face notches.
36
Recognition, Evaluation & Control of Hazards (12
minutes)
This video provides information about flying particles,
slips, trips and falls, contact with chemicals, routes
of entry, noise, and manual handling.
21
Recognizing Substance Abuse (10 minutes)
An overview of potential drug hazards to drivers as per CDL
requirements. This video should be used in conjunction
with your company's education awareness program.
15
Round Trip to Danger (12 minutes)
Depicts the hazards that result from unsafe working
habits and brings the audience close to the real dangers
of logging by dramatizing the consequences of improper
procedures.
17
Safe and Effective Grinding (18 minutes)
Off-hand grinding machine, pedestal and bench grinders.
Pre-grinding - checking equipment. Abrasive wheels and
codes, inspection ring test, and dressing and turning
wheels.
58
Safe and Home Again (15 minutes)
Makes the case that using personal protective equipment
(PPE) benefits the
family as well as the individual. Required PPE is shown.
45
Safe Handling and Storage of Compressed Gas (27
minutes)
This video illustrates the identification, handling and
hazards of working with compressed gas cylinders.
43
Safe Operation of Forklifts (17 minutes)
This video demonstrates proper inspection before and
after forklift use, proper PPE usage, load limits and driving speeds.
54
Safe Operation of Overhead Cranes (20 minutes)
Excellent video that explains pre-operational checks,
operational checks, planning the lifts, operational
rules, and shutdown procedures.
47
Safety and the Human Factor (11 minutes)
This video demonstrates how humans are involved in
accidents, direct and indirect acts, and how people are
affected by accidents.
28
Safety and the Supervisor (25 minutes)
Covers
responsibilities of supervisors and upper management..
48
Safety Awareness (12 minutes)
What is an accident and why do they occur? Everyone's
job is safety, and this video explains the hidden costs
of accidents. Manual material handling, housekeeping
practices, and proper use of tools and equipment are
also discussed.
34
Safety in the Logging Woods Feller Buncher Operation
(10 minutes)
This video covers pre-inspections,
maintenance, personal protective equipment, working on
slopes and around other wood workers.
61
Safety Operations of Overhead Cranes (19 minutes)
This video explores the five steps recommended to run
and maintain overhead cranes.
42
Sensible Wood Cutting (25 minutes)
The techniques shown in this video were developed by Husqvarna in
conjunction with internationally recognized,
professional logging trainers, Soren Ericksson and Tim
Ard. Through their Game of Logging Training Program,
Soren & Tim assist more than 4,500 people yearly in
chainsaw usage including the U. S. Forest Service and
most major paper companies.
40
Skidder Operator Training Video (99 minutes)
This Professional Skidder Operators Workshop training
video contains 14 separate segments, designed to be used
in an 8 hour workshop for skidder operators. Each video
segment is self-contained and can be used in shorter
workshops, even brief weekly or monthly safety meetings
for logging crew members.
38
Slips, Trips & Falls (11 minutes)
Slips, trips and falls is a common term used to describe
a wide range of hazards in the workplace. This program
shows numerous examples in different workplace
environments and is aimed at all personnel in the
workplace.
29
Soren Ericksson’s Game of Logging (15 minutes)
Introduction to the Game of Logging; four levels of
training with comments by companies and individuals on
how the Game of Logging has helped their companies.
14
Split Seconds Saves Lives (23 minutes)
Features interviews with four families who have lost the
man of the house or suffered the pain of a disabling
injury.
69
Stop It Burning (17 minutes)
This video introduces the fire triangle, firefighting
techniques, portable fire extinguishers, types of
extinguishers and fire classification, basic guidelines
while firefighting, and proper use of portable fire
extinguishers and PPE.
46
The Essential Elements of Hand Safety (15
minutes)
This video describes how the hand works with its'
muscles, tendons, bones, etc.
5
Thumbs Up for Sawmill Safety (20 minutes)
Depicts various aspects of sawmill safety. Looks at many
of the hazards that are specific to the sawmill
employee.
19
Traveling with a Load (15 minutes)
Instructions are pre-inspection, loading, driving
conditions, and road hazards. Although this is a
Canadian video, the techniques and instructions are
applicable to all drivers.
3
Tree Felling Techniques for Professional Loggers
(31 minutes)
Renown logging safety consultant, Soren
Ericksson, demonstrates safe and proper felling
techniques. Emphasizes use of personal protective
equipment
59
Understanding Hazards and Risks (18 minutes)
Describes the difference between a hazard and a risk, as
well as what elements determine a hazard and how to
apply a risk factor.
49
Welding Safety (16 minutes)
This video demonstrates temperature and noise extremes,
fumes and gas, sparks and slag, electricity, radiant
energy, ventilation, confined space, and handling of gas
cylinders.
22
Woods Trucking Safety: No Boss on Your Back (10
minutes)
A safety awareness video for log and chip truck drivers.
4
Workers’ Compensation Insurance: The Loggers’ Dilemma
(25 minutes)
Explains in layman's terms workers' compensation
insurance and how it impacts the timber harvester,
stressing why effective loss control techniques are
essential to logging operations in controlling costs.
This web site is not intended to solicit business anywhere except the states of CT, MA, NH, NY, PA and VT.
